With the use of this tool, services can be created in a bulk mode.
For example we have a few "New" customers from partner "PR". All these customers need the internet plan "FUP 100Mbps", with a start date: 2023-01-24 and an IP will be assigned for the service from an IP pool, and login's and password's will be generated. Using the following settings, we can achieve this.
Another example of using this tool:
We have imported customers with the RADIUS login and password as depicted below:
So to create services with the imported login and password, we can use the following setup:
Preview to check the result of the setup:
Then, when we click on
Submit, the services will be created.
Partner - select the partner of which customers belong to, to operate with.
Status - select the status of customers to operate with.
Skip active service check - whether you want the system to check if the customer already has active services or not.
Ignore without IP/Additional IP - whether you want the system to acknowledge if services are entered with or without an IP/Additional IP
Plan - select which plan/item to add to the customers services.
Activation date - when the system should activate the services for these customers.
Router - select which router to add these customers to (IP, Name or title of the router in Splynx can be used).
IPv4 assignment - select which type of IPv4 assignment method to use.
MAC - select which mac address(-es) to apply.
Additional network - which network to use to assign additional IPs.
Login prefix - select the prefix to use to generate logins.
Login suffix - select the suffix to use to generate logins.
Service password - select the method to use to generate service passwords.
If Manual input is selected for any of the fields, please enter the values manually in the provided fields.
Set customers as "Active" on Submit - select whether or not you wish to make the selected customers as active after submitting the mass action to their services.