Splynx can authorize wireless stations on MikroTik by making changes to Wireless Access List in Router OS. With Wireless Access List you can set up the complex logic to work with customers: by signal strength, time of day, limit the speed of each customer, move their to a specific VLAN, etc.
In our case, Splynx can connect each of the APs as a router over the network and add the rules via API to the Wireless ACL. Each AP can authorize the real services of the customers to access the Internet or it can be just added as a free service to block customer by the Wireless ACL.
On MikroTik Wireless Access Point device, make the following configuration steps:
Anyone can be connected to WiFi AP if Default Authentication option is enabled, just knowing the WiFi SSID and Password. So, we have to disable Default Authentication so that WiFi AP checks MAC address along with SSID and Password authentication.
Doing the above step MikroTik WiFi AP will turn into MAC address filtering WiFi AP. In MAC address filtering WiFi AP, The AP will first check whether any device which is eager to connect is allowed in Access List or not. If the device is allowed in Access List, it will be able to connect to WiFi AP otherwise it will be denied.
Default Forward - option allows the routing between the customers that are not in the Access List.
On Splynx side, make the next configuration steps:
enable APIwith the help of toggle, then, add the user credentials from step 1 to the related fields. Also, enable
Wireless Access-Listoption. Press Test API connection to test the configuration.
Permanent (Static)IP address assigned to the related Internet service.
One possible workaround is to add an IP network address space that will not conflict with your network, e.g. you can use
203.0.113.0/24 pools that are reserved by IANA (RFC5737).
MAC(s) = MAC address of station’s (CPE) wireless interface.
To check if the Wireless ACL Authorization works correctly, enable
wireless log on MikroTik Wireless Access Point:
If customer is
Active, Splynx will add the ACL allowing their CPE to connect:
On the other hand, when the customer is
Blocked, Splynx will remove the ACL and customer's CPE will be disconnected from AP: