¶ Device view
¶ Menu sections
In the device control menu, we can find the following sections:
On the Overview tab you can see basic parameters like uptime, IP, CPU usage etc.
On the Relation tab you can set type of device (type should be created under Config → Networking → TR-069 → Types), group (should be created under Config → Networking → TR-069 → Groups as well) also the customer and their services can be linked to this device.
On Tasks tab you will see the pending tasks (like you run a wi-fi password change and task will be created).
On Faults tab you will see tasks what were executed with an errors.
¶ Actions
After clicking the Actions button, you can find the following options:
- Refresh - you can use it to refresh device connection between ACS and Splynx;
- Reboot - remotely reboot a device;
- Run provisioning - run provisioning for a device;
- Send file - send some file to a device;
- Factory reset - reset device to its factory settings;
- Delete - delete this device from the ACS (if the device is connected to the network it will appear in the list again. First, disable the TR-069 client on the device if you do not want this device to appear on the ACS again).
¶ Additional tabs
At the bottom of the page there are additional tabs related to the router: WAN, LAN, NAT, FIREWALL, DIAGNOSES, ACTIVITY:
Switch between available tabs to configure the necessary parameters. As an example we can change a DHCP server parameters:
or add some firewall rules right here:
On the Diagnostic tab you can find such diagnostic tools as: ping, traceroute, upload/download statistic and wifi-analyzer:
To run some diagnostic tool click on Run button near each tool.
This menu can differ depending on a device, e.g. Mikrotik router can be without а Wi-Fi module.
Wi-fi analyzer shows all the available wi-fi networks and its signal strength.
Debug logs can be found under Administration → Logs → Files (administration/logs/files/files.md) and find files by word genie:
